該系列低壓串聯電抗器用于低壓無功補償裝置中，與電容器相串聯，當?shù)蛪弘娋W(wǎng)中有大量整流，變流轉正等諧波源時，其生產的高次諧波會嚴重危害主變及其他電器設備的安全運行。電抗器與電容器相串聯后，能有效的抑制諧波放大，改善系統的電壓波形，提高系統的功率因數，并能有效地抑制合閘涌流及操作過電壓，有效的保護了電容器。
產品概述 Product Overview
該系列低壓串聯電抗器用于低壓無功補償裝置中，與電容器相串聯，當?shù)蛪弘娋W(wǎng)中有大量整流，變流轉正等諧波源時，其生產的高次諧波會嚴重危害主變及其他電器設備的安全運行。電抗器與電容器相串聯后，能有效的抑制諧波放大，改善系統的電壓波形，提高系統的功率因數，并能有效地抑制合閘涌流及操作過電壓，有效的保護了電容器。
This series of low-voltage series reactor is used in lowvoltage reactive power compensation device and connected in series with capacitor phase. When there are a large number of harmonic sources in low-voltage power grid such as rectifier and converter, the high harmonics produced by them will seriously endanger the safe operation of main transformer and other electrical equipment. Reactors in series with capacitors can effectively suppress harmonic amplification, improve the voltage waveform of the system, increase the power factor of the system, and effectively suppress the closing surge and operating overvoltage, effectively protecting the capacitors.
型號及其含義 Model number and it s meaning
工作條件 Working conditions
◇ 海拔高度：<2000m；
◇ 環境溫度：-25℃ ~+45℃，相對溫度≤ 90%；
◇ 周圍無有害氣體，無易燃易爆物品；
◇ 周圍環境應有良好的通風條件。
◇ Elevation: <2000m.
◇ Ambient temperature: -25℃ ~+45℃ , relative temperature ≤ 90%.
◇ No harmful gas and no inflammable and explosive materials in the surrounding area.
◇ The surrounding environment should have good ventilation conditions.
主要特點 Main features
◇ 該電抗器分為三相和單相兩種，均為鐵芯干式；
◇ 鐵芯采用低損耗冷軋取向硅鋼片，芯柱由多個氣隙分成均勻小段，氣隙采用環氧層壓玻璃布板作間隔，以保證電抗氣隙在運行過程中不發生變化；
◇ 線圈采用H 級漆包扁銅線繞制，排列緊密且均勻，具有不錯耐熱性能；
◇ 電抗器的線圈和鐵芯組裝成一體后經過預烘——真空浸漆——熱烘固化這一工藝流程，采用H 級浸漬漆，使電抗器的線圈和鐵芯牢固的結合在一起，不但大大減小了運行時的噪音，而且具有很高的耐熱等級；
◇ 電抗器芯柱部分緊固件采用無磁性材料，確保電抗器具有較高的品質因數和較低的溫升；
◇ 外露部隊年均采取了防腐蝕處理，收出端子采用鍍錫銅管端子。
◇ The reactor is divided into two kinds: three-phase and single-phase, both of which are iron core dry type.
◇ The core adopts high-quality low-loss cold-rolled oriented silicon steel sheet, and the core column is divided into uniform small sections by multiple air gaps, and the air gaps are spaced by epoxy laminated glass cloth plates to ensure that the reactance air gaps do not change during operation.
◇ The coil is wound with H-grade enameled flat copper wire, which is closely and evenly arranged and has excellent heat resistance.
◇ After the coil and core of reactor are assembled together, they go through the process of pre-baking - vacuum dipping lacquer-hot baking and curing, and H-grade impregnating lacquer is used to make the coil and core of reactor firmly combined, which not only greatly reduces the noise during operation, but also has a very high grade of heat resistance.
◇ The fasteners in the core column part of the reactor are made of non-magnetic materials, ensuring that the reactor has a high quality factor and a low temperature rise.
The exposed forces are treated with anti-corrosion treatment, and tinned copper tube terminals are used for the receiving and discharging terminals.
主要技術參數 Main technical parameters
◇ 可用于400V、660、等系統；
◇ 電抗率的種類：1%、6%、7%、12%、14% 等；
◇ 額定絕緣水平3kV/min；
◇ 電抗器各部位的濕升限制：鐵芯不超過85K，線圈溫升不超過95K；
◇ 電抗器噪聲不大于50dB；
◇ 電抗器能在頻加諧波電流不大于1.35 倍額定電流下長期運行；
◇ 電抗值性度：在1.8 倍額定電流下的電抗值與額定電流下的電抗值之比不低于0.95；
◇ 三相電抗器的任意兩相電抗值之差不大于±3%；
◇ 耐溫等級H 級(180℃ ) 以上。
◇ Can be used in 400V, 660, etc. systems.
◇ Types of reactance: 1%, 6%, 7%, 12%, 14%, etc.
◇ The rated insulation level is 3kV/min.
◇ Limit of wet rise of each part of reactor: core not more than 85K, coil temperature rise not more than 95K.
◇ Noise of reactor is not more than 50dB.
◇ The reactor can operate for a long time under the frequency plus harmonic current not more than 1.35 times of rated current.
◇ Reactance value of reactance: the ratio of reactance value at 1.8 times rated current to reactance value at rated current is not less than 0.95.
◇ The difference between the reactance values of any two phases of the three-phase reactor is not more than ±3%.
◇ Temperature resistance grade H (180℃ ) or above.
0511-88223456
